Showing 1041–1080 of 1143 results
VITA31.1
The VME64x backplane forms the basis for the VITA31.1 backplane. The VITA31.1 has simply been enhanced with a Gigabit Ethernet Link. This leads to a PICMG 2.16 Gigabit Ethernet Switch (Fabric) which connects the links (nodes) with one another. It can also be connected to the front panel with an RJ45 connector, if needed.
VME64X
VME64x is an upgrade of the VME64 standard and it permits 64-bit data transmission. This means that a whole set of new features can be added to the VME, VME64 boards and to the backplanes and subracks. The new features include enhanced 160-pin P1/J1 and P2/J2 connections, optional 95-pin (2-mm hardmetric P0/J0 connection) for more user-defined I/O, +3.3V and additional performance.
VMEBUS
The VMEbus specification (ANSI/VITA 1-1994) has been developed for 19" racks and supports bus sizes up to 21 slots. The J1 backplane 3U (16 bit) supports all data and control signals and thus functions as an independent backplane. The J2 backplane (3U) complements the J1 backplane in the system to provide a higher transmission rate (32Bit). The "Mono" backplane (6U) enables fast assembly and easy power supply. It combines the J1 and the J2 backplanes into one unit. Bus termination can be selected from active and passive as well as daisy chain.
AFS11, AFS711, AFS177, AFS717, AFS817, AFS797 – 2 and 4 pole motor reversing contactors
Battery contactors for thermal currents up to 80 A, 150 A and 250 A
AFS14, AFS814, AFS789 – Single pole NC contactors
Current rating 80, 150, 250 A, coil voltage 12 - 120 V, nominal voltage 48 V, optional: coil suppression, blowouts, aux. Switch
AFS15, AFS818, AFS798, AFS784 – Single pole changeover contactors
Current rating 80, 150, 250 A, coil voltage 12 - 120 V, nominal voltage 48 V, optional: coil suppression, blowouts, aux. Switch
AFS19, AFS17, AFS819, AFS799 – Single and double pole NO contactors
Current rating 80, 150, 250 A, coil voltage 12 - 120 V, nominal voltage 48 V, optional: coil suppression, blowouts, aux. Switch
AFS819, AFS881 – Single pole latching NO contactors
Current rating 150, 250 A, coil voltage 12 - 120 V, nominal voltage 48 V, optional: coil suppression, blowouts, aux. Switch
B – Connectors for rail vehicle
Maximum 59 pole connector for power and control circuits on rail vehicles.
BFH – Timetable holders for driver’s desks
Device for fixing timetables and other print media on driver’s desks of EMUs and DMUs.
C100 – Battery contactor with magnetic blowout
Single-pole NO contactor for the unidirectional switching of battery voltages of up to 80 V (150 V rated insulation voltage). Four sizes for continuous currents of up to 60, 100, 150 and 250 A.
C110B –bidirectional battery contactor
Single-pole NO contactor for the bidirectional switching of battery voltages of up to 48 V (80 V rated insulation voltage). Four sizes for conventional thermal current of up to 60, 100, 150 and 240 A.
C130 – combined switching devices for battery voltages
Combination in one device of the main contactor, emergency switch, main fuses and fuses of the control system, as well as a sound signal (option)
C137, C163, C164 – Battery contactors for railway and industrial applications
Unidirectional single pole NO or changeover contactors or with magnetic blowout
C152, C153, C154 – Multi-pole universally configurable AC and DC contactors
2, 3 and 4 pole cam contactors (NO/NC) up to 1,000 V rated insulation voltage and 200 A continuous current. Electric arc chambers for high power ranges, blowout magnets and arcing chambers for DC applications.
C155, C156, C157 – Multi-pole universally configurable AC and DC contactors
2, 3 and 4 pole cam contactors (NO/NC) up to 1,000 V rated insulation voltage and 300 A continuous current. Electric arc chambers for high power ranges, blowout magnets and arcing chambers for DC applications.
C158 and C159 – Universally configurable AC and DC contactors up to 500 A
Single-pole and double-pole cam contactors (NO/NC) up to 1000 V rated insulation voltage and 500 A continuous current. Electric arc chambers for higher power ranges, blowout magnets for DC applications.
C160, C162 – Universally configurable AC and DC contactors
Single-pole cam contactors (NO) up to 1,000 V rated insulation voltage and 250 A continuous current. DC versions with blowout magnets and electric arc arcing chambers
C193 – AC and DC Contactors up to 1,200 Volts
Compact single-pole NO contactor for DC or AC with 1,200 V rated insulation voltage. DC design with blowout magnets and arcing chambers. Frequent switching under load.
C195 – AC and bidirectional DC contactors up to 1,500 volts
Single-pole NO or changeover contactors for DC or AC of up to 1,500 V of rated insulation voltage. Continuous current of up to 320 A. Bidirectional and bistable designs
C294 – Double pole DC contactor up to 1,500 V
Compact DC contactor (2 make contacts) with optimised design for 1,500 V rated insulation voltage. Frequent switching under load.
C295 – Double-pole AC and DC contactors up to 1,600 V
Double-pole NO contactors up to 1,600 V rated insulation voltage and 120 A continuous current. Numerous versions for DC and AC. Frequent switching under load.
C310 – AC and bidirectional DC contactors up to 1,500 volts
Compact single-pole NO contactors for AC and DC (bidirectional) up to 1,500 volts rated insulation voltage. Making current up to 2,500 amps; conventional thermal current up to 500 amps; short-time current up to 3,000 amps
CA – Power contactors for AC applications
Single and triple pole AC contactors (NO). Rated insulation voltage up to 4,800 V, conventional thermal currentup to 800 A, frequency up to 400 hertz.
Контактор CH1030
Single-pole NO contactor for AC and DC (unidirectional). Rated insulation voltage 3,000 V; conventional thermal current 120 A.
CH1130/02 – High-voltage contactor up to 4,800 V
Single-pole NO contactor CH1130/02 AC and DC (semi-bidirectional). Rated insulation voltage 4,800 V; conventional thermal current 250 A.
CH500, CH800, CH801 – 3 kV contactors
Single-pole NO contactors for AC and DC (unidirectional). Rated insulation voltage 3,000 V; conventional thermal current 80 A.
CH715, CH815 – Contactors up to 3,000 V for rail
Single-pole NO contactors for AC and DC (unidirectional). Rated insulation voltage 3,000 V; conventional thermal current 50 A.
CL – Single-pole and multi-pole AC and DC contactors
Single-pole, double-pole and triple-pole contactors (NO) for AC and DC. Rated insulation voltage 2,200 V; conventional thermal current 250 A.
CP – Modular and compact switchgear
1 pole bi-directional high-voltage contactors, disconnectors, changeover switches for DC and AC
CS115/10 – 4 pole AC and DC Contactor
Multi-pole unidirectional DC or AC contactor up to 800 V and 30 A of continuous current. Main contacts and optional auxiliary switch in different combinations NC/NO.
CU – Double pole DC power contactors for power supply and UPS systems
Double-pole NO contactor for DC (unidirectional). Rated insulation voltage 3,000 V; conventional thermal current 1000 A.
EKS127 – Terminal bolts for low voltage applications
Easy to install terminal bolts in 4 sizes
EP – Connectors according to UIC 541-5 VE
Railway connectors for the electro-pneumatic brake system and emergency brake override.
G28 – Modular Circular Connectors
7 pole connector with PE or 12, 16 and 24 pole connector without PE.
G42 – Modular Circular Connectors
6, 6+2, 8, 10, 12, 14, 20 pole connectors with PE or 24 pole connector without PE.
G57 – Modular Circular Connectors
4, 16, 24, 32, 48 pole connector with PE or 4+5 pole connector without PE.
GA – Circular connectors to industry standard
High-quality special purpose connector with 3 pole and PE as well as 11 control contacts.
JA222 – Electronic buzzers
Signalling for intermittent automatic train-running control and dead-man equipment, multi-level adjustment of frequencies and volume, 3 frequency ranges for Germany, France and Italy.