Showing 1001–1040 of 1143 results
K41-00A(H)
Metal Part,nominal current250A,screw threadSpecification:M6,Contact surface:Tin
MPS01
The MPS01 is based on our subrack series "Future". This series lends itself to the creation of top-quality systems. The principal system components, such as backplane, power supply, (not MPS01-4) and wiring are already included. Further accessories, such as a system monitor board, power adaptor and plug-in power supplies are available. The MPS01 system can be combined and extended with various backplanes of our standard program, such as CPCI, VME, VME64X.
MPS02
The basic unit of the MPS02 is based on our subrack series "Future". This series lends itself to the creation of top-quality systems. The principal system components, such as backplane, power supply, wiring, etc. are already included. The power supply, fan and SMC (System Management Controller) system components are all pluggable. Further assembly parts are available.
MPS03
The basic unit of the MPS03 is based on our subrack series "Future". This series lends itself to the creation of top-quality systems. The principal system components, such as backplane, power supply, wiring, etc. are already included. The power supply (max. 300 watt), fan and SMC (System Management Controller) system components are all plugable. Further assembly parts are available.
OPEN VPX BACKPLANES
Open VPX can be regarded as direct follow-up product to the well-known VME64x. By using high-speed serial point-to-point connections, Open VPX sets new standards in terms of data transfer rate and is far superior to its previous model in this respect. Its thoroughly robust design makes it the platform of choice for numerous rugged applications.
PANELPC 2
The case series PanelPC 2 was developed specially for PanelPC and/or display and control systems. The case is typically used in industrial environments. The display frame out of massive aluminium can be used for display sizes from 10.1" up to 21.5" and can as well be adjusted for different kinds of cover glass. The case is primarily designed for the usage of PCAP-Touches. Through a two-piece chassis concept in layer construction an easy and variable mounting is possible. The rear hood, made of stainless steel can be individually adjusted to the required computing platform. The passive cooling system of the case allows the application of computing platforms with the most diverse form factors (eg. 3.5" SBC) with a TDP of max. 25 watt.
PLUG-IN UNITS
Shielded modules and plug-in units are used for the mounting of one PCB. The standard version provides for the accomodation of PCBs in the format of single or double Eurocards sizes. The modules guarantee an optimum for mechanical protection for the location of single PCBs in subracks or cases. The basic versions already cover shielding requirements.
PSB 2.16
The PSB 2.16 backplane is based on the PICMG backplane. The VITA 31.1 has simply been enhanced with a Gigabit Ethernet Link. This leads to a PICMG 2.16 Gigabit Ethernet Switch (Fabric) which connects the links (nodes) with one another. This can also be connected to the front panel with an RJ45 connector, if needed.
QUARTO
The design of the extruded case Sequence with its striking cooling fin structure is particularly appealing. The tube is designed to accommodate single or double Eurocards in multiple levels. This series is available in two basic versions. The decorative frame is available either in a solid closed or open version made of plastic. The open frame version is accompanied by an aluminium front panel. The front panels are optionaly available with a groove accepting conductive gasketing for compliance with EMC criteria and rating up to IP54.
RAILO
The series Railo can be used as a DIN-rail or wall-mounting module and accommodates PC boards, Eurocards or custom electronics. Stable and torsion-free insertion of boards is provided by integrated guidance. The front design can be individually arranged to choice based on experience and equipment which allows freedom in built and visual aspects. The outer dimensions are adjustable in all directions and provide an unrestricted realization of your demanded solution. The front of the modules can be designed for the required application in a few simple steps. The base profile and the accompanied clamping and snap-on lock provide a secure positioning.
ROUNDIT 2000 V0
Self-winding sleeve with high mechanical protection; ideal fire resistance with low toxicity and smoke emission.
ROUNDIT 2000FR
Self-winding sleeve with good mechanical protection; soft to the cable structure.
Roundit V0 EMI
Self-rotating metal solution; flexible and easy to install, providing highly effective shielding of electromagnetic interference.
Roundit V0 EMI CuSn
Self-rotating metal solution; flexible and easy to install, providing highly effective shielding of electromagnetic interference.
S132 — аварийные выключатели для промышленных напольных погрузчиков
1 pole Emergency disconnect switch (NC) with snap-action switch mechanism for battery voltages of up to 160 V DC. Conventional thermal current up to 125 Ampere.
SEQUENCE
The design of the extruded case Sequence with its striking cooling fin structure is particularly appealing. The tube is designed to accommodate single or double Eurocards in multiple levels. This series is available in two basic versions. The decorative frame is available either in a solid closed or open version made of plastic. The open frame version is accompanied by an aluminium front panel. The front panels are optionaly available with a groove accepting conductive gasketing for compliance with EMC criteria and rating up to IP54.
Silicone Tapes 58N-59N-66N-67N-68N-69N-77N-78N-79N-88N-89N-98N-99N
Self-amalgamating silicone tapes, supplied both in the version with a substrate and without it, provide good resistance to liquids and are ideal for sealing, joining and finishing cut ends.
SMARTEC
"The SmarTEC case can be flexibly adapted to specific applications and requirements. The cases are available both as a one-piece tube or a two-part extruded solution A distinctive feature of the two-part extruded solution is the accessibility from the top. Nevertheless it is still possible to benefit from all typical advantages of an extruded product - such as for example stability and design for quick assembly.
Both versions comply with EMC criteria. The case carries a robust appearance using its solid die-cast frame whilst the alternative open frame in combination with aluminium front panels provide almost unlimited options for the mechanical and optical diversification of the front- and rear appearance."
SMC3
"The SMC3 is a modified version of the system monitoring board SMC2 and has been significantly improved in terms of functionality and usability. Among others, it is for example used in VME and CPCI systems, where it intelligently controls the system fans. Thanks to intelligent control algorithms, it combines maximum cooling performance with minimum noise.
The SMC3 has a wide operating voltage range of 5 to 36VDC and five digital inputs and outputs (open collector). A special feature is its ability to monitor and control up to six fans divided into three groups. It is also used to monitor up to eight system voltages and up to eight temperatures, which is particularly essential for use in high-performance systems.
SPACE
The case series Space are typically used for configuration with custom electronics and accessories. Conversion kits are available for horizontal PCB mount of plug-in modules in single or double Eurocard formats. The series can be used as desktop or 19" rackmount cases depending on the choice of front panel. Use of front panel "Type B" in combination with 19" mounting brackets also enables recessed mounting in 19" racks. The cases are suitable for use under EMC criteria and can be upgraded as required with additional shielding material.
Therm-L-Gard B
Therm-L-Gard™ B is a technical solution designed to protect sensors and connectors in thermal radiation conditions. The product can be pushed aside, and after making connections, the elastic nature of the sleeve allows it to return to its original position. starting position..
ThermoJacket S
H High temperature fiberglass braid impregnated with anti-wear coating for ease of handling and installation; ideal for use in some railway applications due to its resistance to flammability, smoke density and toxicity in accordance with the flammability standard for railways EN 45545-2: R22:HL3 R23:HL3
