Back to Systems Technology

SMC3

“The SMC3 is a modified version of the system monitoring board SMC2 and has been significantly improved in terms of functionality and usability. Among others, it is for example used in VME and CPCI systems, where it intelligently controls the system fans. Thanks to intelligent control algorithms, it combines maximum cooling performance with minimum noise.

The SMC3 has a wide operating voltage range of 5 to 36VDC and five digital inputs and outputs (open collector). A special feature is its ability to monitor and control up to six fans divided into three groups. It is also used to monitor up to eight system voltages and up to eight temperatures, which is particularly essential for use in high-performance systems.

Category: Tag: Price on request

Description

To ensure the safety of a system, the system monitoring board can perform an automatic shutdown of the system in case of overtemperature, and the remote control functionality allows the system to be powered up and down via Ethernet. SMC3 is optionally available with an LED-bar or LCD-display to indicate the system status and allows easy commissioning through a smart self-learning mode.

Depending on the application and customer requirements, all control and monitoring parameters of the system monitoring board can be adapted.

To facilitate commissioning all parameters of the SMC3 can be flexibly adjusted through a small software tool by the user.”

Related products

COMPACTPCI PLUS I/O
COMPACTPCI PLUS I/O
[:ru]Объединительные платы CompactPCI, основанные на стандарте PICMG (PICMG 2.3 Rev.1), на 100 % совместимы с классическими объединительными платами CompactPCI и расширяют их за счет современного последовательного соединения «точка-точка» через задний разъем J2. К ним относятся, среди прочего, PCI-Express, Ethernet 1000 Base-T, USB 2.0 и SATA/SAS. Ввод/вывод CompactPCI Plus создает мост к CompactPCI-Serial.[:en]CompactPCI Backplanes based on the PICMG-Standard (PICMG 2.3 Rev.1) are 100% compatible to the classic CompactPCI backplanes and extend them with a modern, serial point-to-point connection through the rear connector J2. These include, among others, the PCI-Express, Ethernet 1000 Base-T, USB 2.0 and SATA/SAS. The CompactPCI Plus I/O builds the bridge to CompactPCI-Serial.[:]
Read more
COMPACTPCI
COMPACTPCI
[:ru]Кросс-плата CompactPCI основывается на стандарте PICMG и предназначена ввиду отказобезопасности и надежности для эксплуатации в промышленных условиях. При этом классическая шина PCI преобразовывается в соответствующую 19-дюймовую платформу. [:en]CompactPCI Backplanes based on a PICMG standard (PICMG 2.0 Rev.3.0) are intended for industrial applications and environments that demand high standards due to reliability and robustness. Here the classical PCI bus is transposed to a 19"-compliant platform.[:]
Read more
VMEBUS
VMEBUS
[:ru]"VMEbus спецификация (ANSI/VITA 1-1994) J1 кросс-плата 3U (16 бит) поддерживает все информационные сигналы и сигналы управления и работает таким образом как самостоятельная кросс-плата. J2 кросс-плата 3U дополняет J1 кросс-плату в системе для работы с более высокой пропускной способностью в 32-разрядном варианте. Для быстрого монтажа, а также непосредственной подачи электропитания предназначена кросс-плата ""Mono"" (6U). Она объединяет J1 и J2 кросс-плату в один элемент." [:en]The VMEbus specification (ANSI/VITA 1-1994) has been developed for 19" racks and supports bus sizes up to 21 slots. The J1 backplane 3U (16 bit) supports all data and control signals and thus functions as an independent backplane. The J2 backplane (3U) complements the J1 backplane in the system to provide a higher transmission rate (32Bit). The "Mono" backplane (6U) enables fast assembly and easy power supply. It combines the J1 and the J2 backplanes into one unit. Bus termination can be selected from active and passive as well as daisy chain.[:]
Read more
PSB 2.16
PSB 2.16
[:ru]"Основу кросс-платы PSB2.16 определяет PICMG кросс-плата. Стандарт PSB2.16 расширен только на один Gigabite Ethernet, что ведет к PICMG 2.16 Gigabit Ethernet Switch (Fabric), который соединяет друг с другом линии передачи связи (Nodes). В отдельных случаях возможно соединение на передней панели с разъемом RJ45."[:en]The PSB 2.16 backplane is based on the PICMG backplane. The VITA 31.1 has simply been enhanced with a Gigabit Ethernet Link. This leads to a PICMG 2.16 Gigabit Ethernet Switch (Fabric) which connects the links (nodes) with one another. This can also be connected to the front panel with an RJ45 connector, if needed.[:]
Read more