Showing 961–1000 of 1143 results
DS6-TW
Push-in Din-Rail TB, Rated voltage : 1000 V,Rated current: 41 A, connector method: Push-in connector, Number of connectors: 3, Number of potentials: 1, Cross section: 0.5 mm² - 10 mm², AWG: 20 - 8, Width: 8.2 mm, Height: 42mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSKK2.5
Push-in Din-Rail TB, Rated voltage : 500 V,Rated current: 22 A, connector method: Push-in connector, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Height: 47.25 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSKK2.5-PE
Push-in Din-Rail TB, connector method: Push-in connector, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Height: 47.25 mm, Color: green-yellow, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSKK2.5-PV
Push-in Din-Rail TB, Rated voltage : 500 V,Rated current: 22 A, connector method: Push-in connector, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 4 mm², AWG: 26 - 12, Width: 5.2 mm, Height: 47.25 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSKK4
Push-in Din-Rail TB, Rated voltage : 500 V,Rated current: 32 A, connector method: Push-in connector, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, Width: 6.2 mm, Height: 47.3mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSKK4-50A(H)
Push-in Din-Rail TB, Rated voltage : 500 V,Rated current: 32 A, connector method: Push-in connector, Number of connectors: 4, Number of potentials: 1, Cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, Width: 6.2 mm, Height: 47.3mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
poles
01P
DSMT2.5-5.08
PCB terminal blocks,Rated current: 15A,Rated voltage (III/2)320V,Cross section:0.2-2.5mm²,pitch:5.08mm,connector method:Screw connector with tension sleeve,Color:green,Contact surface :Tin
poles
01P 04P 32P
EMBEDTEC
The case series EmbedTEC is a flexible product platform practically available in any dimension. Although primarily developed for embedded-computing and HMI (human machine interface) applications, EmbedTEC is also ideally suitable for requirements towards applications like SFF (Small Form Factor) or eNUC (embedded Next Unit of Computing). Thanks to its capacity for flexible configuration, the concept provides the optimal basis, or development platform, for customized case solutions. EmbedTEC consists of one base plate, 4 special design corner elements and a hood. The corner elements, the base plate and the hood can all be individually dimensioned. The base plate and the hood can also be processed for component assembly and mounting parts and accessories. The design also allows the hood to be fitted e.g. with a further functional element such as a heat sink. The use of EMC shielding material - which is also customizable - ensures compliance with enhanced EMC criteria.
EMBEDTEC SFF
EmbedTEC SFF is a versatile enclosure solution for small form factors. This visually attractive aluminium enclosure is an elegant solution to host embedded boards like embedded NUC (eNuc) – pico-ITX (pITX, 2,5") – SMARC – QSeven – SBC’s (for example „Raspberry Pi"). It comes with an exchangeable IO- Shield and a massive Aluminium top cover for cooling purposes. For Platforms with TDP's of up to 20 Watts the top cover can be replaced by a heatsink. The cooling concept can be further adapted to customers’ needs by using perforated side walls or active fans if necessary. In addition to being used as a desktop case, the latest addition to the EmbedTEC family can also be mounted on the wall using an adapter or VESA mount, as well as on a DIN rail in a variety of orientations. Customer-specific adaptations such as dimensions, colour, surface finishes or adapted cooling solutions are of course possible at any time.
Expando B150
Highly expandable sleeve designed to bind wire harnesses; the design allows the product to remain stable after expansion, and its wide expansion range covers several application diameters.
Expando TCP V0
Stretchable braid (1:2) with strong mechanical protection; with low toxicity and smoke emission.
FBUS12.5-05P
DIN rail bus connector,Used to bridge between modules,poles:5.Compatible housing:FMED-02P,FMEH-02P.
FBUS17.5-05P
DIN rail bus connector, Number of potentials: 5, pitch: 3.81 mm, Color: light gray.Compatible housing:FMED-03P,FMEH-03P.
FBUS22.5-05P
DIN rail bus connector, Number of potentials: 5, pitch: 3.81 mm, Color: light gray, Contact surface : gold,Contact point gold plating,bus connector used to connect electronic module housing. Color: light gray.Compatible housing:FMEH-04P.
FBUSRC-3.81
use to mate with DIN rail bus connector,color:black,material:PA66,Flammability rating :V0,Compatible housing:FMED-02P,FMEH-02P,Compatible products:FBUS12.5-05P.
FERRORAIL
The 19" subrack series FerroRAIL was developed specially for vibration resistant applications. In addition to the use in harsh industrial environments this series has been independently approved by the LES-DB conformity of Deutsche Bahn (German railway company) and for applications of the French SNCF railway company. Special constructional measures increase the stiffness and absorbe vibrations at the same time. Shielding measures are included in the scope of service as well as many other useful details and accessories. The application for railway technologies is completed by a rear-side wiring frame. Of course the FerroRAIL series is also adaptable for other applications
FREETEC
The case series FreeTEC can be used as a desktop or a 19" rackmount case. Typical is the configuration with standardized plug-in units, but also with custom electronics or assemblies. In the case version with "special-design front" the front panel is mounted without screws and is therefore suitable e.g. for displays or keypads. The cases are suitable for use under EMC criteria and can be upgraded as required with additional shielding material. The frame construction is self-supporting, the covers (top/bottom covers, side covers) are designed for assembly optimization and provide easy accessibility in case of service requirements. Perforation in the bottom cover, side covers and rear panel provides for heat dissipation of the assemblies.
FRONT PANELS
Front panels are typically used in subracks for cover purposes. There are almost unlimited options due to the selection of different dimensions, the possibility for mechanical modifications and the individual appearance through cosmetical surface treatment in combination with print processes. A bottom-hinged or side-hinged version is available. Front panels are also available in extruded profiles.
FRONTPLATTEN FÜR STECKBARE BAUGRUPPEN
Frontplatten für steckbare Baugruppen können standardmäßig Einfach- oder Doppeleuropakarten aufnehmen. Frontplatten werden ebenfalls aus extrudiertem Profil angeboten. Es stehen verschiedene Schirmvarianten zur Verfügung. Unter diversen Griffvarianten ist ebenfalls die IEEE1101.10 Aufbauversion zu finden.
FT 01/02
Our fan units are designed as circulating fans, they draw in air from below and force it into the modules above. You have a choice among different types of fans, as well as the possibility of retrofitting a retrofit kit in order to implement forced cooling of individual crates (applicable to several crates located one above the other).
Future
The high variability for different kinds of dimensions, the technical features with different shielding concepts, the design for use in simple as well as robust environments and the design possibilities through a large number of accessories, guarantee suitability of the product series in all applications. The outstanding services are used in all industries and are characterized by their high level of acceptance in a variety of ways. The subrack series Future supports any solution starting from a light weigth version all the way towards harsh industrial environments (vibration resistant). Designed for different shielding concepts and applications and individually adaptable. The fixation of the rugged horizontal rails with two screws as well as the tox joined version of the side plates allows the use of the subrack in harsh environments (shock and vibration resistance). The positioning of the rails in the 10-mm increments permits dual mounting.
FyreJacket Aerospace Grade
Protects components at extreme temperatures. The silicone rubber coating has excellent anti-friction properties. Complies with the AS1072 standard.
IPC02
Suitable for the realisation of top-quality 19" PC systems for industrial applications. The system platform IPC01 gives mounting options for passive and ATX form factor mainboards. On the front side are three 5.25" and one 3.5" mounting slots for hard drives as well as two USB 3.0 connectors available. The front carries for the cooling of the boards two fans with dust filter mats. Besides an energy efficient standard 400 watt ATX power supply, other power supplies with higher power as well as redundant power supply are available.